Sanyo 9.1 For Mac OS X users Mounting your camera, When using in a Mac OS X Classic environment

For Mac OS X users

Mounting your camera

1Set the camera to the card reader mode (page 8).

hThe camera is recognized as a drive and appears as an icon named

[XACTI] (or [XACTI_INT] in case of the camera’s internal memory) on the Desktop.

hDouble-click on the [XACTI] (or [XACTI_INT] in case of the camera’s internal memory) icon, and you can process the contents of the card installed in your camera exactly like you would the data in the other computer drives.

Dismounting the camera

CAUTION

i To disconnect your camera, be sure to follow the procedure below. Failure to follow this procedure may cause faulty operation of your computer or loss of card data.

1Drag the [XACTI] (or [XACTI_INT] in case of the camera’s internal memory) icon for your camera on the Desktop to the trashcan. h The [XACTI] (or [XACTI_INT] in case of the camera’s internal

memory) icon disappears from the Desktop. h You can now disconnect your camera.

CAUTION

When using in a Mac OS X Classic environment

i It is not possible to save or load data directly to or from the card installed in the camera. The data must first be saved once to your hard disk.

English 12