11 English
For Windows 2000 users
Mounting your camera
1Set the camera to the card reader mode (page 8).
hIf a message appears on the computer monitor instructing you to load
the Windows CD-ROM, follow the instructions and install the driver.
hThe camera is recognized as a drive, and [XACTI (E:)] (or [XACTI_INT
(E:)] in case of the camera’s internal memory) appears in the [My
Computer] window.
* The drive name (E:) may be different on your computer.
hThe card is recognized (mounted) as a disk.
hDouble-click on the [XACTI (E:)] (or [XACTI_INT (E:)] in case of the
camera’s internal memory) icon in [My Computer], and you can
process the contents of the card installed in your camera exactly like
you would the data in the other computer drives.
Dismounting the camera
CAUTION
iTo disconnect your camera, be sure to follow the procedure below. Failure
to follow this procedure may cause faulty operation of your computer or
loss of card data.
1Left-click on [Unplug or Eject Hardware] in the task tray.
hA list appears showing the devices connected to the computer’s USB
connector.
2Left-click on the camera drive (E:).
* The drive name (E:) may be different on your computer.
hThe [Safe to Remove Hardware] dialog box will open.
3Click on the [OK] button.
hYou can now disconnect the camera.