Method of Use
Continuous Mode
Operate in “HIGH” when vacuuming
Operate in “LOW” when sleeping
Manual Operation Manual Operation
Press
¡Press the fan speed button to choose “LOW”, “MED”, or “HIGH” mode.
¡The volume of sterile, electrolytic mist generated during High is strong (large). The volume is low (small) for all other modes. The mist is generated intermittently.
¡Press the electrolyzed water button to turn the electrolyzed water function “On” or “Off”.
To generate a lot of sterile, electrolytic mist and quickly clean the air in the room
Odors |
Mold |
Bacteria |
Pollen |
Dust Mite |
Droppings |
Power Mist Mode
Press
¡Press the power mist button to operate in power mist mode.
¡High (5 min) → Medium (25 min)
(The air flow indicator does not turn on.)
¡A sterile, electrolytic mist is intermittently generated for 30 minutes.
¡Once the power mist cycle is complete, the device switches to automatic mode.
¡Press the fan speed button to cancel and to switch to a different operating mode.
*When the mode is switched to power mist while the timer is operating, the configured timer cancels.
Stopping the operation at a specified time
OFF!
Timer Operation
Press
¡Press the off timer button and set to a preferred time. Each time the button is pressed, the indicator lamp sets to the timer according to the lamp.
Continuous 1 Hour 2 Hours 8 Hours Operation
(The lamp does not turn on.)
¡The indicators change according to the amount of time that has passed and the lights indicate the amount of time remaining.
¡Once the
* The power mist mode cannot be set with a timer.