Sanyo ABC-VW24A instruction manual Cleaning Methods, Unit, Pre-filter, Filter, Odor Sensor

Warning

Cleaning Methods Always remove the power plug from the wall outlet.

Note:

¡Do not tilt the unit when cleaning. Water from the tank and electrolyzed water unit will spill. ¡Do not use petrol, paint thinner, or any other solvents or polishing powders.

This may cause scratches, discoloration, and cracks.

Unit

¡Soak a soft cloth in diluted neutral kitchen detergent, wring it dry, and wipe.

Use a vacuum cleaner to remove dust from the air inlet and outlet.

Lastly, wipe with a dry cloth.

Pre-filter

¡Remove the front cover and pre-filter (refer to page E-5).
¡Use a vacuum cleaner to remove dust.
¡Wash with water if extremely dirty and dry completely.	English

Filter

It is recommended that the filter is cleaned once per year to ensure the air is effectively cleaned.

¡Use a vacuum cleaner to remove any dust from the surface of the filter. Ensure that the filter does not tear when the mouth of the vacuum cleaner is firmly pressed against the filter. (Remove the filter after removing the front cover and pre-filter. Refer to page E-5.)

Odor Sensor

¡Clean the dust by using a vacuum cleaner.

It is recommended that the device is cleaned once every Odor Sensor 3-6 months. (Remove the front cover. Refer to page E-5.)

Continue in the following

E-12