Preparations

Removing the Stand (if wall mounting)

Cautions:

1.Carefully handle the unit during setup and consult authorized service personnel to ensure successful installation.

2.Before performing work spread cushioning over the base area to lay the Display on. This will prevent it from being damaged.

3.Disconnect the AC power cord firstly.

Screws

Loosen the screws on the

Stand to remove the Stand.

(For model AVP4232/AVP504) Stand

Screws

Loosen the screws on the

 

Stand to remove the Stand.

(For model AVL472)

Note

Stand

!Do not remove the stand from the Display unless using an optional bracket to mount it.

!The appearance of the unit may differ from the actual one.

!To attach the stand, perform the steps in reverse order.

6

Page 8
Image 8
Sanyo AVL472, AVP4232 Preparations, Removing the Stand if wall mounting, Loosen the screws on Stand to remove the Stand