1. General
This booklet briefly outlines where and how to install the air conditioning system. Please read over the entire set of instructions for the indoor and outdoor units and make sure all accessory parts listed are with the system before beginning.
1-1. Tools Required for Installation (not supplied)
1.Standard screwdriver
2.Phillips head screwdriver
3.Knife or wire stripper
4.Tape measure
1-2. Accessories Supplied with Unit Table 1
5.Carpenter’s level
6.Sabre saw or key hole saw
7.Hacksaw
8.Core bits
9.Hammer
10.Drill
11.Tube cutter
12.Tube flaring tool
13.Torque wrench
14.Adjustable wrench
15.Reamer (for deburring)
Parts | Figure | Q’ty | Parts |
|
| Figure | Q’ty | Parts | Figure | Q’ty |
|
|
| Tapping |
| Remote |
|
| |||
Rawl plug |
| 12 | Phillips | 12 |
| 1 | ||||
| screw | control unit |
| |||||||
|
|
| 5/32 | ⋅ | 5/8" (4 ⋅ | 16 mm) |
|
| ||
|
|
|
|
|
|
| ||||
Drain hose |
|
| Remote |
|
|
| 1 | AAA alkaline |
|
|
| 1 | control |
|
|
|
| 2 | |||
adapter |
|
|
|
| battery |
| ||||
|
| holder |
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
| |
Hex |
| 1 |
|
|
|
|
|
|
|
|
wrench* |
| * Packed in the outdoor unit. |
|
|
|
| ||||
|
|
|
|
|
| |||||
|
|
|
|
|
|
| ||||
1-3. Optional Copper Tubing Kit
Copper tubing for connecting the outdoor unit to the indoor unit is available in kits which contain the narrow and wide tubing, fittings and insulation. Consult your nearest sales outlet or A/C workshop.
1-4. Type of Copper Tube and Insulation Material
If you wish to purchase these materials separately from a local source, you will need:
1.Deoxidized annealed copper tube for refrigerant tubing as detailed in Table 2.
When cutting tubing, add approximately 12” to 16” (30 cm to 40 cm) to each tube length to reduce vibration between the air conditioning units.
Table 2
2.Foamed polyethylene insulation for the specified O.D. copper tubes as required to precise length of tubing. Wall thickness of the insulation should be not less than 0.3 in. (8 mm).
1-5. Field Wiring
Use insulated copper wire for field wiring. Wire size varies with the total length of wiring. Refer to
CAUTION Check local electrical codes and regulations before
obtaining wire. Also, check any specified instructions or limitations.
Narrow Tube | Wide Tube | Model | |||
|
|
|
| ||
Outer Dia. | Thickness | Outer Dia. | Thickness | ||
| |||||
|
|
|
|
| |
6.35 mm (1/4") | 0.8 mm (0.0314") | 9.52 mm (3/8") | 0.8 mm (0.0314") | C0951, CL0951 | |
|
|
|
|
| |
6.35 mm (1/4") | 0.8 mm (0.0314") | 12.7 mm (1/2") | 0.8 mm (0.0314") | C1251, CL1251 | |
|
|
|
|
| |
6.35 mm (1/4") | 0.8 mm (0.0314") | 15.88 mm (5/8") | 1.0 mm (0.0394") | C1852, CL1852 | |
|
|
|
|
| |
3
