Sanyo CE32WN3-B, CE28WN3-B instruction manual Teletext / Hotel Specifications / Specifications

TELETEXT / HOTEL SPECIFICATIONS / SPECIFICATIONS

Viewing TV while searching for a page

Sometimes the page access can take some time. While waiting you can view the television picture by pressing the X button.

1. Enter the new page number. Press the X button.

2. When the page is found, the page number will appear over the television picture.

3. Press the X button again, to view the teletext page.

X

X

Hotel Specification

A special two digit code controls special conditions for Hotel and Rental use.

The first digit controls presetting, Childlock and Maximum volume. The second digit controls the start up programme position.

The first digit has 3 options 0, 1, 2

0= Normal operation, presetting enabled

1= Hotel presetting is disabled

2= Hotel/Rental, presetting is disabled, Child Lock is always on, the current volume at time of setting becomes the maximum volume level.

The second digit has 10 options 0~9

SET➞ 0 Last programme position start

SET➞ 1 Programme position "1" start

SET➞ 2 Programme position "2" start

SET➞ 3 Programme position "3" start

SET➞ 4 Programme position "4" start

SET➞ 5 Programme position "5" start

SET➞ 6 Programme position "6" start

SET➞ 7 Programme position "7" start

SET➞ 8 Programme position "8" start

SET➞ 9 "AV1" position start

How to enter your code

For example, you wish to prohibit presetting and start up in AV1 mode,

you must enter the code 19. Whilst pressing the button on the

TV set, press the ? button on the remote control handset. The Hotel display appears on the screen.

HOTEL: 0 0

Enter the code you require e.g. 19 using the numeric buttons 1 and 9. When you next switch on the TV set there conditions will apply.

HOTEL: 1 9

Changing from Hotel Codes 20~29

You must first reduce the colour to minimum before entering a new Hotel code. Switch off the TV with the Mains On/Off button and then

switch on, the code is activated. Press the button to restore the picture settings.

TV Specifications

Power source	AC 220~240V, 50Hz
Television system	System I
Colour system	PAL
Receiving channel	UHF: 21~69
Aerial input impedance	75 ohm
AV terminal
21-Pin Terminal	AV1 : CENELEC Standard (with RGB/
	S-inputs)
	AV2 : CENELEC Standard

Sound output Main L/R 10 watts x 2

Dimensions	780 x 526 x 513 (CE28WN3-B)
(W x H x D mm)	880 x 583.5 x 567.5 (CE32WN3-B)
Weight	32 Kg	(CE28WN3-B)
	46 Kg	(CE32WN3-B)

Specification subject to change without notice.

Scart Specifications

The specification of the 21 pin connector is as follows.

AV1 Terminal
Pin
1	Audio output	0.5V/ 1 K ohm
2	Audio Input	0.5V/10 K ohm
3	Audio output	0.5V/ 1 K ohm

4Audio earth

5Earth (blue)

6	Audio Input	0.5V/10 K ohm
*7	Blue (B) input	0.7Vpp/75 ohm
8	Remote switch input	L:0-2V, 16/9:4.5 to 7V,
		4/3:9.5 to 12V H:10-12V

9Earth (green)

*10

*11	Green (G) input	0.7Vpp/75 ohm
*12

13Earth (red)

14Earth

15	Red (R) *1 or chrominance input	0.7Vpp/75 ohm
*16	Fast blanking	L:0-0.4V H:1-3V

17Earth(video)

18Earth

19	Video output								1 Vpp/75 ohm
20	Video/sync. or luminance input								1 Vpp/75 ohm
21	Connector shield
*Not connected on AV2 terminal
	20	18	16	14	12	10	8	6	4	2

21 19 17 15 13 11 9 7 5 3 1

17