SERVICING & HELPFUL HINTS

Servicing

Your television is fully transistorised and does not contain any user serviceable components.

Removal of the cabinet cover may expose you to dangerous voltages. Refer all servicing to qualified service personnel.

Unplug the television receiver from the wall outlet and refer servicing to qualified service personnel under the following conditions:

If the power cord or plug is damaged.

If liquid has been spilt into the television receiver.

If television receiver has been exposed to rain or water.

If the television receiver has been dropped or the cabinet has been damaged.

If the television receiver exhibits a distinct change in performance.

If the television receiver does not operate normally by following the operating instructions.

Adjust only those controls that are covered in the operating instructions as improper adjustment of other controls may result in damage. This will often require extensive work by a qualified technician to restore the television receiver to normal operation.

When replacement parts are required, have the service technician verify that the replacements he uses have the same safety characteristics as the original parts. Use of manufacturers specified replacements can prevent fire, shock or other hazards.

Helpful Hints

NO PICTURE, NO SOUND

Check if TV is plugged in.

?Try a different channel, if OK, probably station trouble.

POOR PICTURE, SOUND OK

Adjust BRIGHTNESS control.

?Adjust FINE TUNING control. Check aerial connections.

NO COLOUR, PICTURE OK Adjust COLOUR control.

Adjust FINE TUNING control.

Is the programme in colour ?

WEAK PICTURE

Check aerial connections on back of set.

Check aerial for broken wires.

Re-orient aerial.

The following faults are not caused by the receiver:

"GHOSTS"

Reflections of signals from mountains or high buildings will cause multiple images, called "Ghosts". These abnormal conditions can be reduced to minimum by repositioning aerial or by installing new one suited for your area.

"INTERFERENCE"

Interference may be caused by electrical appliances, car ignition systems, etc. This should normally be a temporary condition, but should this interference persist, contact your dealer.

Recommendations to protect our environment

Stand-by mode: In order to save energy and to maintain an optimum picture quality, it is advisable to switch off the TV using the ON/OFF button located at the front of TV set.

Used batteries: The batteries in the remote control of your TV set do not contain mercury. However, SANYO recommends that you do not dispose of used batteries in domestic refuse. Please, contact your dealer or your local authorities for information regarding the disposal of used batteries or your nearest collection point.

Recommendation about the end-of-life: Your SANYO TV set has been designed and manufactured using high quality materials which can be recycled and reused. In the future, when the life cycle of this set comes to an end, specialised companies can disassemble it and reuse certain materials. This reduces the impact of waste in our environment. Please, contact your local authorities for information regarding the disposal of your set when the time arrives. Help us to conserve the environment we live in!

18

Page 18
Image 18
Sanyo CE28WN3-B, CE32WN3-B instruction manual Servicing & Helpful Hints, Recommendations to protect our environment