DIGITAL OPERATION
Channel List
●Edit channel list
1.Press Menu button to select Main Menu.
2.Select Channel List by using e or d buttons. Press 8 to enter.
Channel list
Lock channels
Scan for channels
3.Select Lock channels by using e or d buttons. Press 8 to enter.
Lock channels | All channels | |
BBC ONE | 1 | BBC ONE |
2 | BBC TWO | |
| 3 | ITV 1 |
| 4 | Channel 4 |
| 5 | five |
| 6 | ITV 2 |
| 7 | BBC THREE |
| 8 | Teletext |
| 9 | BBC FOUR |
| 10 | Sky Travel |
| 11 | UK History |
| 12 | Ch 14 |
| 13 | CH 15 |
| 14 | QVC |
| 15 | TV Travel Shop |
YParental lock OK Save
4.To delete channels from this list use e or d buttons to highlight a channel.
6.To lock or unlock parental locked channels, select the channel and press the yellow button. This will lock or unlock the channel.
7.Press the OK button, selected channels will be locked / unlocked and parental lock/unlock stored.
You will go back to Channel List menu.
●Scan for channels
1.Press Menu button to select Main Menu.
2.Select Channel List by using e or d buttons. Press 8 to enter.
3.Press dto select Scan for channels. Press 8 to enter.
Scan for channels |
|
Channels found | 0 |
The scan will take approximately 3 minutes
In progress | RET | Stop |
This will scan all available channels. This is a useful function if you delete channels and want to get them back later.
4.Press OK to save (All Channels).
5.Press OK again to watch normal TV picture.
✐Parental lock is still saved after the scan for channels has been initialised.
Technical Information
In this section a lot of the information will only be useful to a techni- cian. Some parts are however useful to you. If there is an upgrade in software you will need this section to upgrade your TV from time to time.
1.Press Menu button to select Main Menu.
2.Select Technical Information menu by using e or d buttons. Press 8 to enter.
Technical information
Signal information
Software upgrade
Product data
Reset
3.Select Signal information by using e or d buttons and press
8 to enter.
Signal information
BBC THREE (BBC)
Free
DVB Identifiers (9018,4103,4351)
Channel 63
Signal strength (%) 34
Bit error rate
Uncorrected errors/sec
OK | Select | RET | Cancel |
This screen cannot be altered but if you have a problem you may need to refer to this screen for some data.
4.Press Return or OK button to go back to Technical information screen.
■Software upgrade
1.Press d button to select Software Upgrade screen. Press 8 to enter.
Software upgrade
Looking for new version.......
RET Cancel
This looks for any new software upgrades that maybe transmitted at any time.
2.Press Return button to go back to Technical information screen.
3.Select Product Data by using e or d buttons and press 8 to enter.
Product data
Product LDITPGFTG_01_00
Software 1.9.76 build jun 25 2003 16:10:15
Resourse 1.26.3
Boot 2.4.0
RET Cancel
This is useful to service engineers.
4.Press Return button to go back to Technical information screen.
5.Press d button to select Reset screen. Press 8 to enter.
!Reset receiver configuration?
RET Cancel | R Confirm |
If you press Red button to confirm it will return all settings to factory (default) mode for digital channels. To start a scan for all available channels switch the TV set Off and On again and press D/A button to select digital.
When the TV set has been initialised press OK to Save and OK to watch TV picture.
9
