Sanyo CE52LH1R Controls and Menus, Menu Operation, Picture menu, Gbinstallation, White Tone

GBINSTALLATION

GB

Controls and Menus

1 2

1. The LCD display has a Standby light to show there is power.

Switching into/from standby mode

The Standby mode is used for switching the LCD monitor off for short periods of time. In standby mode the monitor is switched off but is still receiving mains power.

●To turn the monitor into standby mode, press the 4￿ button. The blue power indicator illuminates more brightly.

●To turn the monitor ON from standby mode, press the 4￿ button again.

If you find the power indicator flashing, disconnect power cord from the power outlet and contact our Service desk.

This warning is a sign to let you know that the power protection function of this TV set is now operating.

2.Control buttons (bottom corner of back cover)

Menu button: Used to display or cancel main menu.

Input/ dbutton: Switch between AV1, AV2, AV3, PC or DVI mode.

1￿or 2 buttons: provide up and down adjustments.

4￿button: To switch to standby mode (to switch off completely disconnect the monitor from the power supply).

Menu Operation

Many of your monitors functions are controlled through the menu function, using the remote control.

MENU
	Picture	Brightness
		Contrast
		Color
		Tint (only if NTSC equipment is detected)
		Sharpness
		White Tone				White Tone / R / G / B
	Sound	Advanced Setting								DCDi / ACC/ACM / CCS / DNR / MPEG NR / Film Mode
			Treble
			Bass
			Balance					On / Off
	Timer	Bass Expander
		Current Time
		Off Time
		On Time
	Setup	On Position				AV1 / AV2 / AV3 / PC / DVI
		Menu Setup					Language / H/V-Position / Duration / Transparence
		PIP / POP Setup							PIP/POP Mode / Main/Sub Source / PIP Position
		Initial Settings						Western / Eastern / Russian / Arabic / Farsi
		Text Language
		Tile Mode		Tile Mode Active / H/V_Sets / H/V Location / Bezel H/V Adjustment
		AV2 Setting			RGBHV / YPbPr
	PC Adj.		Auto Adjust
			H-Position
			V-Position
			Clock
			Phase

During menu operation the bottom of the on screen display will show which controls can be used for menu navigation.

Press the MENU button to enter the main menu. Whenever main menu is accessed initially, PICTURE will be the defaulf selection.

A sub menu is selected using the 5or 6button and pressing the 1￿or 2 button when the required sub menu is highlighted. When you have finished you can press the BACK button to return to the previous menu, press the MENU button to exit the menu operation.

Picture menu

1.Press the MENU button. PICTURE will be the default selection. Press the 1￿or 2 button to enter.

Set the picture settings for your “personal” preference.

2. Use the 5or 6button to select eg. Brightness and the 1￿￿ or 2 button to adjust levels.

■White Tone

May be used to adjust the color tone of the picture. Use the 5or 6button to select White Tone and press the 1￿or 2 button to enter the sub menu. You can select Personal, Cool, Standard or Warm settings by using the 1￿or 2￿button. To adjust the color tone of the picture by using the 5or 6button to select Red(R), Green(G) or Blue(B) and the 1￿or 2 button to adjust levels. These settings will be stored in personal mode automatically.

60

7