CALLER ID FEATURES
This phone receives and displays incoming call information transmitted by your local phone company. This information can include the phone number and/or the name, date and time. The phone can store up to 40 calls for later review.
Caller ID with Call Waiting
When you subscribe to Caller ID with Call Waiting (Visual Call WaitingTM) service from your phone company, you are able to see who is calling when you hear the Call Waiting beep. Caller identification information appears on screen after you hear the tone.
•Press the FLASH/PROGRAM key to put the current call on hold so that you can answer the incoming call.
IMPORTANT: To use these features you must subscribe to either the standard Name/Number Caller ID Service or Caller ID with Call Waiting Service.
Time | Date | Number of calls |
Number
Name
Caller ID list
The incoming caller information transmitted from the phone company is received by your phone between the first and second rings and stored in the Caller ID list. If you answer a call before the second ring the caller information may not be stored.
When the Caller ID list memory is full, a new call automatically replaces the oldest call in memory. NEW appears on screen for calls received that have not been reviewed.
Note: Check with your local phone company regarding name service availability.
Important: You cannot receive Call Waiting Caller ID information while using the conference features.
CALLER ID FEATURES
Reviewing Caller ID list
As calls are received and stored, the screen is updated to let you know how many calls have been received.
1.Press CID ▼ to scroll through the Caller ID list from the most recent to the oldest. You can also use the CID ▲ or ▼ key on the base.
2.Press CID ▲ to scroll through the Caller ID list from the oldest to the most recent.
Note: You may also transfer Caller ID entries to the directory. See Storing caller ID entries in directory below.
Storing Caller ID entries in the directory
Before storing a caller ID number, make sure the number appears in proper digits for your dialing area. If not, change it using the
The
7
10
11Long distance code 1 +
Note: If a specific memory entry is longer than 15 digits, the first 15 digits show on the screen. To view the remaining digits, press
1.Use the CID ▲ or ▼ key to select desired Caller ID entry.
2.Press MEM. SELECT MEMO 1– 0 shows on the screen.
3.Enter a location number.
4.If the memory location already contains Caller ID information, and you want to replace the information, press MEM again. REPLACE MEMO? shows on screen.
5.Press MEM again to confirm and save.
22 | 23 |
