INITIAL PROGRAMMING
Resetting to default
You can reset the phone programming to the initial factory default settings.
The default settings are:
Language - English
Contrast - 2
Area Code - _ _ _
Ringer Tone - Ringer Tone 1
Time Set - 12:00 AM
Default Set - 2 NO
1.Make sure the phone is OFF.
2.Press FLASH/PROGRAM on the base six times.
DEFAULT SETTING 1YES 2NO shows on screen.
3.Press CID ▲ or ▼, or the 1 or 2 key to select your choice.
4.Press FLASH/PROGRAM to confirm.
12
BASICS
Receiving a call
When an incoming call is received, both handset and base screens light and show caller information*. The incoming call LED on the handset and the SPEAKER key on the base flash.
*A subscription is required from your local phone company to receive Caller ID information on your phone. See Caller ID Features, page 22.
Using handset:
1.Press TALK/CALL BACK to answer the call.
Note: If handset is in the base cradle, remove it from base before pressing the TALK/CALL BACK key.
2.Press TALK/CALL BACK again to hang up.
Note: If you replace the handset to the base cradle, the handset automatically hangs up.
Using base speakerphone:
1.Press SPEAKER to answer the call.
2.Press SPEAKER again to hang up.
Making a call
Using handset:
1.Press TALK/CALL BACK.
Note: If handset is in the base cradle, remove it from base before pressing the TALK/CALL BACK key.
2.Dial the phone number.
The screen shows the number as you enter.
Telephone number
Channel No. | Call timer |
| Volume level |
|
|
|
|
3.Press TALK/CALL BACK again to hang up.
13
