GETTING STARTED
NOTE: Before using the handset and to prolong battery life, place the handset in the base handset cradle and charge for at least 15 hours.
Attaching the belt clip
Belt clip installation
1.Attach the belt clip by inserting the sides of the belt clip into the slots.
2.Snap the ends of the belt clip into place.
BASIC FUNCTIONS
Standby mode and sleep mode
When the handset has been inactive for a while, it will enter sleep mode and the LCD backlight and key lights will switch off. Touch any key to return to standby mode. The LCD backlight and key lights will activate to indicate standby mode.
To adjust the time from standby to sleep mode, please refer to HANDSET SETTINGS - CHANGE DISPLAY SETTINGS (page 25).
NOTE: If keylock is on you will need to unlock phone to enter standby mode.
Making and receiving calls
To make a call:
•Touch 
to get a dial tone.
•Enter destination phone number using 0 - 9. If you make an error, touch 
to cancel.
13
