PHONEBOOK

The phonebook can store up to 60 phone numbers (of up to 24 digits) and names (up to 16 characters).

Storing numbers

1.Touch .

2.Touch .The cursor is pointing to “ADD RECORD”.

3.Touch again to confirm.

NOTE: When the memory is full, you will hear a beep and 'PHONEBOOK

FULL' appears. You cannot store names and numbers.

4.Enter the name using 1 - 9 (see TO INPUT NAMES below).

5.Touch to confirm and save name.

6.Enter the number using 1 - 9, *, #. If you wish to add a pause, touch key at the desired location. 'P' will appear on the screen. Each pause counts as one digit.

7.Touch to confirm and save entry.

NOTE: A number can be saved without entering a name.

To input names:

1.Touch a number key (0-9) repeatedly within one second until the desired character appears.

2.Touch a different key to input the next character or if the next character uses the same number key, you must wait for 1 second until the cursor move to next digit and then touch the same number key to input character.

3.Repeat steps 1 and 2 until the name is entered.

16

Page 16
Image 16
Sanyo CLT-D6622(WH), CLT-D6620(WH), CLT-D6623(WH) instruction manual Phonebook, Storing numbers, To input names