CONNECTIONS
L ch speaker R ch speaker
|
| + |
|
|
|
| LEFT |
|
|
|
| _ |
|
|
|
| _ |
|
|
| + | RIGHT |
|
|
LEFT | + | SPEAKERS |
| |
(6Ω MIN) |
| |||
| _ |
|
| |
|
|
|
| |
SPEAKERS |
| PHONES |
|
|
(6Ω MIN.) | _ | LINE IN |
| |
RIGHT |
| R | L | |
| RESET |
| ||
| + |
|
|
|
To an AC outlet
Video/Auxiliary equipment
AM |
LOOP |
FM |
ANT |
FM Aerial
AM loop Aerial
Note:
-Do not connect the mains lead to an AC outlet until all connections have been made.
-The system is not completely disconnected from the mains when the z/ON button is set to the z position.
Speakers
Connect the connector of the left speaker lead to the “L” SPEAKERS socket and the connector of the right speaker lead to the “R” socket.
If you have difficulty inserting the speaker lead connector, turn it over and reinsert it.
When connecting the speakers, make sure that + and - polarities are matched properly. Otherwise, the sound may appear to be lacking in the bass range and stability.
Connect the red speaker wire to the red terminal + and the black wire to the black terminal
Unwind the aerial wires, then connect them to the AM LOOP terminals. Place the loop aerial in a position which yields the best AM reception, or attach it to a wall or other sur- face as shown in figure.
Note: |
| |
To minimize noise, the speaker, mains and |
| |
any other leads should not come close to |
| |
the indoor or external aerial lead and AM loop | Screws (not supplied) | |
aerial. Do not place the aerial leads close to | ||
| ||
the system. |
|
Headphones
Connect stereo headphones (not supplied) to the PHONES socket (rear of the unit) for monitoring or for private listening. The speakers are auto- matically disconnected when headphones are connected.
FM Aerial
FM indoor aerial is sufficient to receive broadcasts. Extend the aerial wire as straight as possible and, while listening to the sound from the system, secure it in a position which yields minimal distortion and noise.
Video/Auxillary equipment
Connect audio leads (not supplied) from the audio output socket of a video/ auxilary equipment to the LINE IN sockets.
AM Loop Aerial
Assemble the loop aerial as shown in figure.
