Picture zoom [DVD]

1.Press the SHIFT + 3 ZOOM buttons during normal, slow or still play. The central part of the picture is magnified.

-Each time the button is pressed, the zoom mode changes as follows.

1 v 2 v Off

-Press the 4, a, 5 or bbutton to change the zoom point.

2.Press the SHIFT + 3 ZOOM buttons to select “ Off” to return to the original screen.

Note:

Picture zoom may not work on some discs.

Viewing from a desired camera angle (Multi-Angle) [DVD]

Some DVD discs may contain scenes which have been shot simultaneously from a number of different camera angles. The jacket or case of discs that are recorded with angles will be marked.

Example:

3

Note: The recorded angles differ depending on the disc used.

1.Play the disc that is recorded with angles.

2.Press the SHIFT + 1 ANGLE buttons repeatedly until the desired angle appears.

Example:

3/5

Angle replay [DVD]

During Multi-angle play screen, press the SHIFT + 2 A.REPLAY buttons. The unit skips back to last approximately 10 seconds, changes it to the next camera angle and plays it, and continues play. (If desired, press the button again.)

Repeat play

Press the REPEAT button during play (or programmed play) of the title (or track) you want to repeat. Each time the button is pressed, the repeat mode changes as follows.

[DVD]

Chapter (1 REP.): Repeat of chapter being played

Title (ALL REP.): Repeat of title being played Off: Normal play mode

[CD]

1 (1 REP.): Repeat of track being played

All (ALL REP.): Repeat all tracks

Off: Normal play mode

Designated range repeat play (A-B Repeat)

1.Press the A-B REP button during play at the beginning of the section you want to repeat (Point A). “ A-” appears on the screen. “A-REP.” blinks on the display.

2.Press the A-B REP button again at the end of the section (Point B). “A- B REP.” remains lit on the display.

The section between points A and B is played repeatedly.

3.To return to normal play, press the A-B REP button again.

Note:

Repeat play or A-B repeat play mode may not work correctly with some discs.

Programmed play [CD]

Up to 20 selections can be programmed.

Programming procedure

1.Press the PROGRAM button when in the stop mode. The programme mode screen appears. (A simple screen appears in the display on the player and a more in-depth screen appears on the TV screen).

2.Press the number button(s) to select the track number. Example:

To select track No.3, press 0, then 3 (or press 3). To select track No.10, press 1, then 0.

To select track No.24, press 2, then 4. Note:

If you make a mistake, press the CLEAR button.

3.Press the 5 button to move the highlighted box down. Example as seen on your TV screen.

Program Mode

All Clear

 

 

1

03

6 --

11 --

16 --

2

 

7

12

17

--

3

--

--8

--13

--18

4

--

9 --

14 --

19 --

5

--

10 --

15 --

20 --

4.Repeat step 2 - 3 above to select another track.

5.Press the a button to start play. “PROG.” remains lit.

When all programmed selections have played, the unit stops automatically.

- The programme contents are retained in memory.

Note:

To play the programme again, press the PROGRAM button to call up the programme mode screen, then press the a button.

To clear the programme one by one

In the programming mode, press the 4 or 5 button to select the track number. Then press the CLEAR button.

To clear all the programmes

In the programming mode, press the 4button to select “All Clear”. Then press the ENTER button.

To change the programme

1.In the programming mode, press the 4 or 5 button to select the programme number.

2.Press the number button(s) to select the track number to be replaced.

Press the PROGRAM button to quit the programme mode screen.

15

Page 16
Image 16
Sanyo DC-TS750 Picture zoom DVD, Viewing from a desired camera angle Multi-Angle DVD, Angle replay DVD, Repeat play