Press the INPUT SELECT on your Remote Control to step through signal inputs to select PC.
Press the SETUP/TV MENU to display the TV’s PC Setup Menu. Select Auto Adjustment.
Insert one end of a Stereo Mini-Audio cable into the PC Audio Out jack and the other end into the TV PC/HDMI AUDIO Input jack. (Stereo Mini- Audio Cable not supplied.)

Connections to other equipment

To connect the TV to a PC (Personal Computer)

NOTE: Before connecting any cables, disconnect the AC Power Cords of both the TV and Personal Computer from the AC outlets.

1 Connect an RGB cable from the monitor output (a) on your PC to the RGB connector on the TV and tighten the screws. (Monitor Cable not supplied.)

NOTE:

If Computer has only DVI Output (b), a DVI to RGB converter will be required (converter not included).

2

HINT:

Volume can be adjusted both from the PC and the TV VOL +/–.

3

4

(a)(b)

RGB

DVI JACK

Rear of the unit

VGA cable (not supplied)

Audio cord (not supplied)

ENGLISH

NOTE:

Power on the TV and any other peripheral equipment before powering on the computer.

NOTE:

• Save and close all documents, in case computer might need to be restarted.

• Before connecting your computer to your TV, please refer to the following chart to set to a compatible resolution.

• A Refresh Rate value of 60 Hz on your computer is recommended for your TV.

RESOLUTION

ASPECT RATIO

REFRESH RATE

HORIZONTAL

VERTICAL

 

 

(Hz)

FREQUENCY

FREQUENCY (Hz)

 

 

 

(kHz)

 

640 x 480

4:3

60

31.47

59.94

72

37.86

72.81

 

 

75

37.50

75.00

720 x 400

18:10

70

31.47

70.00

 

 

56

35.16

56.25

800 x 600

4:3

60

37.88

60.32

72

48.08

72.19

 

 

 

 

75

46.88

75.00

1024 x 768

4:3

60

48.36

60.00

1280 x 768

15:9

60

47.78

59.87

1280 x 720

16:9

60

45.00

60.00

1360 x 768

16:9

60

47.71

60.00

37

54H0521A_eng.indd 37

3/17/10 4:28:08 PM

Page 37
Image 37
Sanyo DP32670 To connect the TV to a PC Personal Computer, Volume can be adjusted both from the PC and the TV VOL +, Rgb