37
ENGLISH

To connect the TV to a PC (Personal Computer)

NOTE: Before connecting any cables, disconnect
the AC Power Cords of both the TV and Personal
Computer from the AC outlets.
1Connect an RGB cable from the monitor output (a)
on your PC to the RGB connector on the TV and
tighten the screws. (Monitor Cable not supplied.)
NOTE:
If Computer has only DVI Output (b), a DVI to RGB
converter will be required (converter not included).
2Insert one end of a Stereo Mini-Audio cable into
the PC Audio Out jack and the other end into the
PC/DVI AUDIO Input jack. (Stereo Mini-Audio
Cable not supplied.)
HINT:
Volume can be adjusted both from the PC and the TV
VOL +/–.
3Press the INPUT SELECT on your Remote
Control to step through signal inputs to select PC.
4Press the SETUP/TV MENU to display the TV’s
PC Setting Menu. Select “Auto Adjust”.
NOTE:
Power on the TV and any other peripheral
equipment before powering on the computer.
NOTE:
Save and close all documents, in case computer might need to be restarted.
Before connecting your computer to your TV, please refer to the following chart to set to a compatible
resolution.
A Refresh Rate value of 60 Hz on your computer is recommended for your TV.
•
•
•
Rear of the unit
RGB DVI JACK
(a) (b)
VGA cable (not supplied)
Audio cord (not supplied)
RESOLUTION ASPECT RATIO REFRESH RATE
(Hz) HORIZONTAL
FREQUENCY
(kHz)
VERTICAL
FREQUENCY (Hz)
640 x 480 4:3
60 31.47 59.94
72 37.86 72.81
75 37.50 75.00
720 x 400 18:10 70 31.47 70.00
800 x 600 4:3
56 35.16 56.25
60 37.88 60.32
72 48.08 72.19
75 46.88 75.00
1024 x 768 4:3 60 48.36 60.00
1280 x 768 15:9 60 47.78 59.87
1280 x 720 16:9 60 45.00 60.00
1360 x 768 16:9 60 47.71 60.00
Connections to other equipment
56Q0221A_eng.indd 3756Q0221A_eng.indd 37 1/13/11 2:25:00 PM1/13/11 2:25:00 PM