:Select
:Adjust
PC
-
HDMI2
-
HDMI1
-
Component
-
Video2
-
Video1
-
Video Label
5
6
Select “Channel”, then press ▶ or ENTER. Press ▲ or ▼ to select “DTV Signal”.
Press ▶ or ENTER to check the digital signal strength.
The digital signal strength screen will appear.
If necessary, adjust the direction of the antenna to obtain the maximum signal strength.
:Select
ENTER :Set
:Adjust
>>
Ch Label
Label Clear
CH-1
Channel Number
15-1
– / VCR / DVD / STB / Cable / Satellite / Receiver / Game / Camcorder / PC / DVI PC / Blu-ray
Press ◀ or ▶ to select the desired label for that input source.
Press ▲ or ▼ to select an input which you want to label.
Select “Setup”, then press ▶ or ENTER.
Press ▲ or ▼ to select “Video Label”, then press ▶ or ENTER.
The Video Label feature allows you to label each input source for your TV.
1
2
3
4
To clear a Ch Label
After step 3 above, press ▲ or ▼ to select “Label Clear”, then press ▶ or ENTER.
NOTE:
• The channel labels will be reset after “Automatic Search” on page 20.
Labeling video inputs
Repeat steps 3-4 for other channel.You can assign a label to each channel.
When you finish inputting the label name, press EXIT to return to the normal screen.
The characters rotation as follows:
- , () @ / + = -
SPACE
If the character which you desire appears, press
ENTER.
Repeat this step to enter the rest of the characters. If you would like a blank space in the label name, you must choose the empty space from the list of characters.
4
Press ▲ or ▼ to select “Add/Delete”, then press ▶ or ENTER.
Clear All
All channels are deleted from the channel memory.
1 Select “Channel”, then press ▶ or ENTER.
2
3 Press ▲ or ▼ to select “Clear All”, then press ▶ or
ENTER.
CH Add/Delete
| Adding Channel | >> | |
| Add/Delete | >> | |
| Clear All | >> | |
| | | |
| :Select | ENTER :Set |
Checking the digital signal strength
This TV will allow you to view the digital signal meter for digital channels.
1
2
3
CH DTV Signal
Signal Level 
NOTE:
• Signal meter feature is not available for analog channels.
• After 240 seconds, DTV Signal screen will return to normal TV-operation automatically.
Labeling channels
Channel label appear with the channel number display each time you turn on the TV, select a channel, or press DISPLAY.
You can choose any four characters to identify a channel.
To create channel labels
1 Select “Channel”, then press ▶ or ENTER.
2 Press ▲ or ▼ to select “Ch Label”, then press ▶ or ENTER.
The Ch Label menu will appear.
3 Press ◀ or ▶ to select a channel you want to label, then press ▼.
CH Ch Label
| Channel Number | 15-1 |
| Ch Label | CH-1 |
| Label Clear | >> |
| | |
:Select 
:Adjust
Press ◀ or ▶ repeatedly until the character you want appears in the first space.
CH Ch Label
