BASIC SET-UP AND CONNECTIONS

INITIAL SET-UP

1.Install batteries in remote control, see page 9.

2.Connect signal, see below.

3.Plug in AC power cord.

4.Press POWER key to turn on TV.

5.Follow on-screen instructions, see pages 10 ~ 12.

CONNECTING CABLE SERVICE, OR RF ANTENNA, OR SATELLITE DISH RECEIVER TO TV

❶ Cable Box OR ❶ Satellite Receiver OR ❶ RF Antenna

 

CH3

CATV IN

 

 

 

CH4

VIDEO

L-AUDIO-R

IN FROM

 

 

IN

OUT

OUT TO TV S-VIDEO

 

SAT.

VIDEO

L-AUDIO-R

 

 

 

 

Operational Tip for No Signal Connection:
Notes:
–If you do not have a cable box, connect cable directly to TV 75
ohm jack or VCR.
–If you do not have a VCR, connect signal directly to TV 75 ohm jack.

CATV FRANCHISE NOTE: Cable companies, like public utilities, are franchised by local government authorities. To receive cable programs, even with equipment which is capable of receiving cable channels, the consumer must subscribe to the cable company’s service.

IN

VCR Back

FROM ANT.

 

OUT

 

 

OUT TO TV

TV Back

 

 

COMPONENT

AUDIO VIDEO

UHF/VHF/CATV

2

INPUT 2

75Ω

Y

VIDEO

 

PB

L (MONO)

 

PR

R

 

S-VIDEO

If the TV is used as a monitor only, with a DVD player or some other type of external equipment, and no cable or antenna signal is available, the following setup is necessary:

–Your TV is designed to automatically search for available channels. Therefore, the initial start up requires that you press the MENU key, enabling the TV to auto- matically go through the channel search process before you can operate the TV. After the initial channel search is com- pleted, you must press the MENU key again to complete the channel search process. This may take several minutes.

–After the channel search process is com- plete (2 searches), you can press the INPUT key on the remote control to use the TV as a monitor.

■The TV will automatically select the correct Antenna mode for the type of RF signal you connect.

■TV will switch off automatically after 15 minutes if there is no signal reception (cable out or station not broad- casting).

Exception—When the Video mode is selected, the TV will not automatically switch off when signal reception has stopped for 15 minutes.

■If you move the TV to a new location, press the RESET key twice after connecting the signal and turning on the TV.

4

Need help? Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032