Sanyo DS27225 CONNECTING A VCR OR OTHER EQUIPMENT, DVD Player, ❶AV Cable –, Remote Control, ①Audio Cable –, ①S-VideoCable –, Back View of VCR, www.sanyoctv.com, Press

USINGTHE REAR AUDIO VIDEO INPUT JACKS

CONNECTING A VCR OR OTHER EQUIPMENT

Switch off TV and external equipment before connecting cables. (Cables are not supplied.)

❶Connect VCR or other equipment’s Audio Video Out to the TV Audio Video Input.For Mono VCR (Single Audio Jack) connect VCR Audio Out to TV Audio (L) Input.

OR

①Connect DVD Player or other equipment’s S-Video Out and Audio Out to the TV S-Video and Audio In Jacks.

Using the S-Video jack overrides the Video (AV2) jack.

❷Press POWER to turn on the TV. Turn on external equipment also.

❸To access Audio Video inputs, press the INPUT key to select VIDEO2.

Note: Audio Video Input (AV2) and Component inputs share the same audio (R/L) input jacks.

Remote Control

INPUT RESET POWER

❸ 1 2 3

❷

What you will need for connections:

❶AV Cable – 1

OPTIONAL CONNECTION

①S-Video Cable – 1

①Audio Cable – 1

Back View of VCR						DVD Player
					VIDEO OUT
			IN		AUDIO OUT	VIDEO OUT	COMPONENT VIDEO OUT
			FROM ANT.			SELECT
IN	VIDEO	RF	VHF/UHF
R-AUDIO-L					L R COAXIAL	S-VIDEO COMPONENT Y PB/CB PR/CR
		CHANNEL TO TV
OUT		3	4		DIGITAL OUT	S-VIDEO OUT
			OUT
R-AUDIO-L	VIDEO
❶					①	①
			Rear TV AV Input Jacks
			COMPONENT	AUDIO VIDEO	UHF/VHF/CATV
			2	INPUT 2	75Ω

Y VIDEO

PB L

PR R

S-VIDEO

■Make sure all cable connectors are fully seated on jacks.

■Always match AV cables according to the colors; red for right audio, white for left audio and yellow for video.

■Press INPUT key after connecting cables to access the AV inputs. There is NO need to tune to a blank channel.

■A solid Blue screen with the word VIDEO2 displayed, means that the Video mode is selected, but no signal is being detected at the Video jacks. Check connections, turn on external equipment.

8 Need help? Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032