■ Adjusting the volume level: Flashing Right arrow indicates volume is increasing and flashing Left arrow indicates volume is decreasing.
■ Cannot select channel with number numbers 1~9. Example: Channel 05.
■ Be sure batteries are installed correctly.
■ Point the remote control toward the TV. Objects between the remote control may cause misoperation of the remote control function.
keys. Press “0” in front of

USINGTHE REMOTE CONTROL

INSTALL BATTERIES AS SHOWN (2 AAA, not included)

Notes:

–Do not mix old batteries with new ones or mix different types of batteries together.

–Remove the batteries if the remote control will not be used for a month or more. Weak batteries may leak and cause damage. (Normal battery life is roughly six months.)

IMPORTANT NOTE: Spent or discharged batteries must be recycled or disposed properly in compliance with all applicable laws. For detailed information, contact your local County Solid Waste Authority.

REMOTE CONTROL KEYS

➀ Power Key—Press to turn TV ON or OFF.➁ Input Key—Press to select the program source to watch:
TV signal or signal from DVD Player or other equipment

➀

you have connected to the AV jacks.

 

➂ Number Keys—Press two keys to select a channel.

➁

Example: Press 0 then 6 to select channel 6. For cable
channels 100 through 125, press and hold the 1 key until

 

C1–– appears. Then press the other two numbers.

 

➃ Caption Key—(See page 12.)

➂

➄ Menu Key—Use this key with the ▲▼ and – + keys to

 

navigate and adjust features of the on-screen menu system.

➃

(See pages 10 ~ 12.)

➅ Channel Scanning (CH ▲▼) and Volume (VOL – +)

➄

Keys—Press to scan through the channels in memory and
to adjust the volume.

➅

 

 

 

 

Point towards TV

➠

 

INPUT RESET POWER

1 2 3

4 5 6

7 8 9

CAPTION SLEEP

0

MENU RECALL

CH

VOL VOL

MUTE CH DISPLAY

(Continued on page 10.)

Need help? Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032

9