USINGTHE COMPONENT VIDEO AND AUDIO INPUT JACKS

CONNECTING A DVD PLAYER

Switch off TV and external equipment before connecting cables. (Cables are not supplied.)

❶Connect a DVD Player or other equipment’s interlaced Component Video Out to the TV Component Video In (Y-Pb-Pr) Jacks.

❷Connect the DVD Player’s Audio Out to the TV AV2 Audio In (L/R) Jacks.❸Press POWER to turn on the TV. Turn on external equipment also.❹To access Audio Video inputs, press the INPUT key to select COMPONENT2.

Notes: DVD Player component output must be set to Interlaced (480i).

Audio Video Input 2 (AV2) and Component inputs share the same audio (R/L) input jacks.

Connect equipment to the Component2 video input or the AV2 video input, but not both types at the same time.

DVD Player

What you will need for connections:

❶Component video cable – 1

❷ Audio Cable – 1

Remote Control

INPUT RESET POWER

❹ 1 2 3 ❸

 

 

 

VIDEO OUT

 

 

 

 

 

AUDIO OUT

VIDEO OUT

COMPONENT VIDEO OUT

 

 

 

 

 

 

 

 

 

 

SELECT

 

 

 

 

L

R COAXIAL

S-VIDEO COMPONENT

Y PB/CB

PR/CR

 

 

 

 

 

 

DIGITAL OUT

S-VIDEO OUT

 

 

 

TV Back

 

❷

 

 

❶

COMPONENT

AUDIO VIDEO

UHF/VHF/CATV

 

 

 

 

2

INPUT 2

75Ω

 

 

 

 

Y

VIDEO

 

 

 

 

 

PB

L (MONO)

 

 

 

 

 

PR

R

 

 

 

 

 

S-VIDEO

■A solid Blue screen with COMPONENT2 displayed means that the Video mode is selected, but no signal is being detected at the Component jacks. Check con- nection, and turn on external equipment.

■Press INPUT key after connecting cables to access the AV inputs.There is NO need to tune to a blank channel.

6

Need help? Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032