Names and functions of parts (front panel)

DSR-3706PA

1 2 3 4 5

6

7

8

9

F G H I

1Power indicator (POWER)

On: The power cord at the rear panel of the DVR is inserted in the outlet.

Off: The power cord on the rear panel of the DVR is not inserted in the outlet.

Fast blinking: Hard disk error.

Slow blinking: Cooling fan error.

If the indicator is blinking, contact the store where you purchased the DVR.

2Remaining capacity warning indicator (FULL) (P46) (Normal recording area)

On: When recording on the hard disk has become impossible.

Blinking: The available hard disk space has dropped below the specified level.

Off: The available disk space is reset by initialization or by allowing overwrite.

3Remaining alarm capacity warning indicator (ALARM FULL ) (P46) (Alarm recording area)

On: When recording on the hard disk has become impossible.

Blinking: The available hard disk space has dropped below the specified level.

Off: The available disk space is reset by initialization or by allowing overwrite.

4Lock indicator (LOCK) (P66) (Security lock)

On: The operation has been locked using the security lock.

Off: The password of a valid administrator is entered to release the lock (a buzzer will sound).

5Alarm indicator (ALARM) On: Pre-alarm recording. Blinking: Alarm recording.

6Audio output terminal (AUDIO OUT)

The audio output is the same as that of the rear panel AUDIO OUT terminal.

7Video output terminal (VIDEO OUT)

The video output is the same as that of the rear panel MAIN MONITOR OUT terminal.

8USB terminal (USB)

This terminal connects to an optional CD-R/RW drive. When the front panel and the rear panel terminals are connected simultaneously, the front panel is given priority.

9Camera selection buttons and indicators

On: The camera is selected, or in multi-screen mode, the indicator is on for each selected camera.

Blinking: Video-loss or an alarm detected.

When "K" is displayed in the upper right corner of the screen a value can be input. (P33)

FQuad-screen display button and indicator (QUAD) (P20)

On: Quad-screen display.

Off: Other operation is selected.

GMonitor 2 button and indicator (MON 2) (P16) On: Monitor 2 operation.

Off: Other operation is selected.

HPlus screen button and indicator (PLUS) (P15)

On: Enlarges and displays the image of one camera only in the top left corner of the screen.

Off: Pressing the PLUS button again will display the previous screen.

IMulti-screen button and indicator (MULTI) (P20) On: Multi-6 screen display.

Off: Other operation is selected.

English

Foreword 8