Preparing for use
English
1Connect the supplied power cable.
The power indicator turns on, and the monitor displays the "PLEASE SET THE CLOCK !" message.
The DVR performs playbacks or searches based on the recording date and time. Select the LANGUAGE/ CLOCK SET using the INITIAL SET in the MAIN MENU, and set the date and time using <CLOCK SET>.
•At the same time, the recording areas of the internal hard disk are setup automatically. When the REC/ STOP button is pressed, the device is ready for recording.
Please refer to the "Recording area menu description" section for more information. (P43)
|
| Archive area |
|
|
| 1% |
|
Alarm | 19% |
| Normal |
recording |
| recording | |
area |
| 80% | area |
|
|
|
(Hard disk recording areas)
If the alarm indicator blinks when the power is turned on or when settings are performed, this indicates that the hard disk or the cooling fan is malfunctioning.
Refer to P5 and P8 for more information.
•Fast blinking: Hard disk error
•Slow blinking: Cooling fan error
2When the time and date setting is complete, the operation display appears on the monitor.
The operation display shows operation/related information, such as the date, time and the operation symbol.
Refer to "Operation display" for more information. (P14)
(Operation display)
1Press the MENU button and turn the
"ENGLISH" starts blinking.
MENU
<MAIN MENU> |
|
1.INITIAL SET | |
2.RECORD SET | |
3.GENERAL SET | |
4.SCREEN SET | |
| |
<INITIAL SET> |
|
1.LANGUAGE/CLOCK SET | |
2.CAMERA DETECT | |
3.TITLE SET | |
4.HOLIDAY SET |
<LANGUAGE/LANGUE/SPRACHE/IDIOMA>
ENGLISH
<CLOCK SET>
<SUMMER TIME SET>
2Turn the
The cursor moves to the date/time settings.
Language selection:
ENGLISH, FRANCAIS, DEUTSCH, ESPAÑOL
3Turn the
Select the number using the
(J) | (S) Day | Year | Hour | Seconds |
| Month |
| Minutes | |
|
|
|
When the setting of "Minutes" is complete, the cursor moves to <SUMMER TIME SET>, and the clock starts from 00 seconds.
•The day of the week is automatically set.
•The clock is stopped during date/time settings.
4Press the EXIT/OSD button to end the setting procedure.
EXIT/OSD