Care and Cleaning

CLEANING

Caution: To avoid accidental burns, allow Grill & Roast™ to cool thoroughly before cleaning.

1. Before cleaning, unplug from wall outlet and allow to cool.

Important: Heat continues to be ON until power ON/OFF button ( ) is pressed or appliance is unplugged.

2.Place drip tray under front of roaster. Use plastic spatula to scrape off any excess fat and food particles left on heating plates.

3.Use a warm, soapy sponge to wipe heating plates clean and allow any greasy runoff to drip into drip tray; rinse sponge and wipe again to remove any soapy residue. Dry thoroughly with an absorbent paper towel.

4.Empty drip tray and wash in warm, soapy water; dry thoroughly with a paper towel.

5.To remove stubborn buildup, use a nylon or nonmetallic scrubbing pad to clean interior of your roaster.

Important: Do not use metallic scrubbing pads, steel wool or any abrasive cleaners to clean any part of Grill & Roast™; use only nylon or nonmetallic scrubbing pads.

Tip: For tougher cleaning of build up, we recommend Soft Scrub® or Bar Keepers Friend® as good cleaners that are nonabrasive and ideal for nonstick surfaces.

6.To clean roaster exterior, wipe with a warm, wet sponge and dry with a soft, dry cloth.

Important: Do not immerse body of roaster in water or any other liquid.

7.Any servicing requiring disassembly other than the above cleaning must be preformed by a qualified electrician.

Caution: Make sure to hold roaster lid while cleaning to prevent accidental closing and injury.

STORAGE

Always make sure roaster is clean and dry before storing.

TROUBLESHOOTING

PROBLEM

POSSIBLE CAUSE

SOLUTION

 

 

 

Finish on grill plates

Metal utensils have

Always use heatproof plastic or

has cut marks.

been used.

wood or wood utensils to avoid

 

 

scratching nonstick surface of

 

 

heating plates. Never use metal

 

 

skewers, tongs, forks or knives.

 

 

 

There is food

Roaster not properly

Use a nylon scrubbing pad

buildup on heating

cleaned after use.

and hot soapy water to clean

plates.

 

heating plates. Do not use

 

 

steel wool scrubbing pads or

 

 

abrasive cleaners to clean

 

 

heating plates.

Roaster does not

Roaster is not

Check to be sure roaster is

turn on.

plugged in.

plugged into a working outlet

 

 

and power ON/OFF button ( )

 

 

has been engaged.

Heating plate has

Water from cleaning

Dry heating plates immediately

white spots on it.

has dried on surface

after washing.

 

of heating plates.

 

9

10

Page 6
Image 6
George Foreman GV6SQVC manual Care and Cleaning, Troubleshooting