Recording settings
1Display the <RECORDING CONDITIONS SET> screen as explained in "Displaying the recording settings screen" (P39).
MENU | <MAIN MENU> |
| 2.RECORD SET |
If multiple DVR units are connected, recording can be automatically continued on the next DVR when the recording area of the first one becomes full.
1Connect the SERIES OUT terminal of the CONTROL terminal block on the rear panel of the first DVR to the SERIES IN terminal of the next DVR.
SERIES IN
| <RECORD SET> |
|
|
| 3.RECORDING CONDITIONS SET | ||
(J) | (S) |
|
|
| <RECORDING CONDITIONS SET> |
| |
| NORMAL RECORDING AREA |
|
|
| OVERWRITE | : | ON |
| ALARM RECORDING AREA |
|
|
| OVERWRITE | : | ON |
| REMAINING DISK WARNING | : | ** |
| SERIES RECORDING | : | ON |
| AUTO DELETE | : | OFF |
2Turn the
3Turn the
The "REMAINING DISK WARNING" changes from "**" to "1%", and disk overwrite is prohibited.
If the available capacity in the normal or alarm recording area drops below 1%, the corresponding FULL indicator on the front panel of the DVR will start blinking.
|
| <RECORDING CONDITIONS SET> |
| |
|
| NORMAL RECORDING AREA |
|
|
|
| OVERWRITE | : | OFF |
|
| ALARM RECORDING AREA |
|
|
(J) | (S) | OVERWRITE | : | OFF |
|
|
| ||
|
| REMAINING DISK WARNING | : | 1% |
|
| SERIES RECORDING | : | ON |
|
| AUTO DELETE | : | OFF |
4Changing the "REMAINING DISK WARNING" level
1Turn the
2Turn the
The cursor moves to "SERIES RECORDING". Selections: 1%, 2%, ... 9%, 10%
5Press the EXIT/OSD button to end the setting procedure.
SERIES OUT
(First DVR unit)
(Second DVR unit)
(Third DVR and more)
•Use cables no longer than 3m between the DVR units for serial connection.
•Connect the MIC terminal and the AUDIO terminal as shown below.
Microphone (sold separately)
English
EXIT/OSD
Amplifier (sold separately)