4. Ground Wire (Black)

• Connect this wire to the vehicle chassis.

5. Power Antenna/Amplifier Turn On (Blue/Red)

Connect this wire to the control terminal of a Power Antenna or an external amplifier.

When not using a Power Antenna or an external amplifier, this wire is not connected.

6. Remote IR sensor

Connect remote IR sensor to wire remote socket to use with steering wheel remote control and to extend range of remote control.

7. CD Changer and Sirius Receiving Connector Socket

• Connect a CD changer to the CD changer and Sirius Receiving Connector socket

MAIN UNIT

CDC

(sold separately)

Connect a Sirius module to the CD changer and Sirius Receiving Connector socket (see separate instruction booklet on Sirius Radio operation)

MAIN UNIT

SIRIUS MODULE

(Sirius tuner module sold separately)

Connect a Sirius module and a CD changer to the CD changer and Sirius Receiving Connector socket (see separate instruction booklet on Sirius Radio operation)

MAIN UNIT

SIRIUS MODULE

CDC

(Surius tuner module and CD changer sold separately

LINE OUT CONNECTIONS

The unit has two pairs of line out terminals (see WIRING figure above). You can use a separate front or a separate rear channel amplifier to upgrade your system.

RCA Line- out Jacks

Connect a patch cable (not supplied) from the White (left channel) and Red (right channel) RCA line output jacks to the line input terminals of the external amplifier.

26

Page 29
Image 29
Sanyo ECD-T1560 manual Line OUT Connections