COMPACT DISC CARE
Dirt, dust, scratches and warpage can cause deterioration in the sound or intermittent skipping some tracks during play.
• This unit has been designed to play compact discs bearing the identification logo shown on the left. No other discs can be played.
•Do not use
The player could be damaged.
•Fingerprints and dust should be carefully wiped off the signal surface of the disc (glossy side) with a soft cloth.
Wipe in a straight motion from the inside to the outside of the disc. Unlike conventional records, the compact disc has no grooves to collect dust and debris. Small dust particles will have no effect on reproduction quality.
•Do not insert a disc which is cracked into the unit.
•Do not apply paper or write anything on the surface of the disc.
•To prevent warping the disc, do not expose
it to direct sunlight, high humidity or high temperatures for extended periods of time.
•Never use chemicals such as record cleaning sprays, antistatic sprays or fluids, benzene or thinner to clean compact discs.
These chemicals will permanently damage the plastic surface of the disc.
•When not using the disc player for extended periods of time, remove the compact disc and return it to the plastic storage case. This will protect the disc from dust and exposure to the sun.
Recommended CD-R/RW Media
Data may not be properly written to
CD-R Media
TDK USA Corp., Taiyo Yuden (U.S.A.), Inc., Ricoh Corporation, Eastman Kodak Company, Maxell Corporation of America, Mitsubishi Chemical Corporation, Fuji Photo Film U.S.A., Inc., Mitsui Chemicals, Inc., Sony Corporation of America, Philips Electronics North America Corporation, Imation Corp.
CD-RW Media
TDK USA Corp., Ricoh Corporation, Mitsubishi Chemical Corporation.
Additionally,
3
