Sanyo EM-S1000 instruction manual Program 2-STAGE Cooking, Confirmation of Memory

PROGRAM (2-STAGE) COOKING (cont.)

2.Confirmation of Memory

(Example) When program No.3 is programmed as:

		First stage (Max power for 30 seconds.)		Second stage (Power Level 2 for 10 minutes.)
		Operational flow			Display Window
1.
			Open door		“0” will appear on the display
2.			Touch number “3”		Stage 1 bar lights. Programmed
					No. 3 Input Time 30 sec. (“ .30”)
					will appear on the display. After 2
					sec., Input Power Level “PL 10”
					will appear for 2 sec. and then
					return to input time.
			Touch another “3”		Stage 2 bar lights. Programmed
	3.
					No. 3 Input Time 10 min. (“10.00”)
					will appear on the display. After 2
					sec., Input Power Level “PL 2” will
					appear for in 2 sec. and then
					return to input time.
4.			Touch “Clear” key		The “0” will appear on the display.

NOTE:

1.Touch “Clear” key after confirming the contents of the units memory.

2.If you wish to change a program memory, touch the “Memory” key twice and then input again as shown in pages 10 - 14.

13