RADIO OPERATION

2

4 5 1

3

SELECTING RADIO MODE . . . . . . . . . . . . . . . . . . . . . . . 1

Press the BAND button ➀ to switch from tape, CD player or CD changer* mode to the radio. * If a CD changer is connected.

Each time the BAND button is pressed, the selected band changes as shown below.

FMI FMII AM

RADIO TUNING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

S Automatictuning . . . Press the TUNE/SEEK/TRACK ￿ or ￿ button ➁ for more than 1 second until it beeps twice if the beep tones are on.

When the button is released, the system will start automatic tuning and stop at the next receivable station.

S Manualtuning . . . . . . To select higher frequency stations, press the ￿button for less than 0.5 seconds. To select lower frequency stations, press the ￿button for less than 0.5 seconds. To quickly scan up or down in frequency, press and hold the ￿ or ￿button. Release thebuttonwhenthedisplayapproachesthedesiredfrequency, then press and release the button repeatedly until the desired frequency is displayed.

STORING PRESET STATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

The preset buttons ➂ can be used to store 6 stations in each band (FMI, FMII, and AM) for convenient access to your favorite stations.

S Programmingstations . . . 1 Select the desired band, then tune in the station you want to store in memory. 2 Press and hold one of the preset buttons for more than 2 seconds.

Repeat steps 1 and 2 to program additional stations.

S Quick tuning . . . . . . . . . . . Select the desired band, then press one of the six preset buttons.

-+9+-