ELECTRICAL CONNECTIONS
1.ANTENNA SOCKET
ANTENNA PLUG
4Bspeaker System | 2Bspeaker System | |||
(White) | Front Left | (White) | Left | |
(White/Black) | (White/Black) | |||
Speaker | Speaker | |||
| (Gray) | |||
(Gray) | Front Right | Right | ||
(Gray/Black) | (Gray/Black) | |||
Speaker | Speaker | |||
|
| |||
(Green) | Rear Left | (Green) | Do Not | |
(Green/Black) | (Green/Black) | |||
Speaker | Connect | |||
|
| |||
(Violet) | Rear Right | (Violet) |
| |
(Violet/Black) | (Violet/Black) | Do Not | ||
Speaker | Connect | |||
|
| |||
2.)12V Constant Power Supply (Yellow)
3.)12V Accessory/Switched(Red)
4.Ground Wire (Black)
5.Power Antenna (Blue/Red)
6.Amplifier Turn On (Blue/White)
CautionS DO NOT connect any speaker wires to the metal body or chassis of the vehicle.
S DO NOT connect the speaker common
SConnect each speaker wire directly to each speaker terminal.
SAll speaker common
SInsert the plug from the antenna installed in your vehicle into this socket. (If yourvehiclehasadualantenna system, a dual antenna to single antenna cable adaptor may be required.)
2+12V Constant Power Supply (Yellow)
SConnect this wire to the +12V power terminal which receives power continuously.
SConnect to location drawing 10 A amperage or more.
3+12V Accessory/Switched(Red)
S Connect this wire to the terminal which receives power while the ignition switch is at ON or ACCESSORY position.
S If the ignition switch does not have an ACC position, connect this wire to a +12V power terminal which re5 ceives power continuously. (Same as item 2.)
S Connect to location drawing 100 mA amperage or more.
4Ground wire (Black)
S Connect this wire to the vehicle chassis.
5Power Antenna (Blue/Red)
SConnect this wire to the control terminal of a Power Antenna.
SWhen not using a Power Antenna, this wire is not connected.
6Amplifier Turn On (Blue/White)
S Connect this wire to an external amplifier.
S When not using an external amplifier, this wire is not connected.