Notes
S When using a two>speaker installation, the Green, Green/Black, Violet, Violet/Black wires, which are used for a four>speaker installation, are not used. The ends of these wires must be covered with electrical tape to prevent them from shorting to the unit or the vehicle chassis.
S When using a two>speaker installation, set the FADER control to the center position.
S When fuse replacement is necessary re> move the blown fuse by using pliers. Then install the new 15 amp. fuse.
Fuse 15 A
NG OK
Burnt
LINE OUT/CD CHANGER CONNECTIONS
SThe unit has a built5in CD changer controller and line output terminals. You can use a compatible Sanyo CD changer and a separate rear channel amplifier to upgrade your system.
RCA LineBout Jacks
CD Changer DIN Socket
Red White
(Right) (Left)
External
Amplifier
CD Changer
Rear Speaker
CD Changer DIN Socket
SConnect the 85pin DIN cable, which is supplied with the
changer, to the DIN socket on the back of the unit. RCA LineBout Jacks (For Rear Speakers)
SConnect a patch cable (not supplied) from the White (left rear channel) and Red (right rear channel) RCA line output jacks to the line input terminals of the external amplifier.