Care and Cleaning (continued)

Air Clean Filter

The air clean filter removes dust and dirt from the air, and reduces odors and smoke from

 

tobacco.

 

This air clean filter cannot remove harmful gases or vapors nor ventilate air in the

 

room. You must open doors or windows frequently when you use gas or oil heating

 

appliances. Otherwise there is a risk of suffocation in extreme cases.

How to install the air

The air clean filter needs to be installed behind the air intake grille.

clean filter

1.

Remove the air intake grille.

 

2.

Install the air clean filter in the position

 

 

shown in the figure.

 

3.

Remount the air intake grille.

How to clean the air clean filter

NOTE

Cleaning the main unit and remote control unit

Removing and remounting the air intake grille

CAUTION

Washing the grille with water

Air clean filter

In general, the filter should be sucked to remove dust in low fan speed of a vacuum cleaner once every three months.

If there is heavily grime on the filter, soak the filter in lukewarm water with neutral detergent diluted 1:500 for 1 to 2 minutes then wash it.

Rinse the filter in clean water, then let it dry on the towel in room temperature.

Do not bend nor give excessive force onto the air clean filter.

If the filter surface is heavily blocked with dirt or damaged, replace it with new one. Purchase a replacement filter at your local dealer. (model STK-FDXB)

Wipe clean using a soft, dry cloth.

To remove stubborn dirt, moisten a cloth in warm water no hotter than 104 °F, wring thoroughly, and then wipe.

The air intake grille can be removed in order to wash it with water.

Refer to “How to remove the anti-mold filter” and “How to replace the anti-mold filter” on page 23.

When using a footstool or the like, be careful not to let it tip over.

Clean the grille gently using a soft sponge, or the like. Then wipe away any remaining moisture.

Neutral detergent may be used to remove stubborn dirt. Then rinse thoroughly with water and wipe away any remaining moisture.

Cleaning the negative ion generator

Follow the steps below when the generator has become dirty.

For safety, be sure to turn the air conditioner off and also to disconnect the power before cleaning.

Remove the dust on the negative ion generator.

Use a toothbrush, etc. to dust off the end.

Use a cotton swab, etc., to clean around the generator inside the plastic case, taking care not to touch the electrodes.

Negative ion generator (metal electrodes inside plastic case)

NOTE

During use, the negative ion generator and other metal parts may become discolored: this is normal and not indicative of malfunctioning.

If the dirt on and around the negative ion generator is left to build up, a puffing or sputtering sound will eventually be heard. In this case, clean the generator immediately.

Do not apply excessive force while performing maintenance.

24

OI-801-24-EG

 

Page 24
Image 24
Sanyo KHS1872, KHS2472 instruction manual Air clean filter, Negative ion generator metal electrodes inside plastic case

KHS1872, KHS2472 specifications

The Sanyo KHS2472 and KHS1872 are two robust and efficient refrigeration solutions designed by Sanyo, a company reputed for its innovation in the appliances sector. Each model features advanced technology geared towards maximizing performance while providing energy efficiency, making them suitable for both commercial and residential use.

Starting with the Sanyo KHS2472, this model boasts a large capacity, making it perfect for businesses that require significant storage for perishable goods. The refrigeration system utilizes high-performance compressors that ensure rapid cooling and consistent temperature regulation. One of its standout features is the energy-efficient design, which contributes to lower electricity costs without compromising on effectiveness. The KHS2472 is equipped with multiple shelving options that enhance accessibility and organization, allowing users to store a variety of items without hassle.

In terms of technology, the KHS2472 integrates advanced temperature control mechanisms, including digital displays, that offer precise monitoring and adjustments. This ensures that the contents inside are stored at the optimal temperature while minimizing fluctuations. Furthermore, the model utilizes an eco-friendly refrigerant, aligning with Sanyo's commitment to sustainability and environmental responsibility.

On the other hand, the Sanyo KHS1872 is designed for those who require a slightly smaller capacity but still demand top-tier features and performance. This model is perfect for smaller establishments or as an additional refrigeration unit for larger operations. Similar to the KHS2472, the KHS1872 prioritizes energy efficiency, employing cutting-edge insulation technology that helps maintain temperature while reducing energy consumption.

The KHS1872 also comes equipped with user-friendly controls, allowing for easy temperature adjustments and monitoring. This model includes adjustable shelving as well, enabling efficient storage solutions tailored to various needs. Moreover, it features enhanced airflow systems that ensure uniform cooling throughout the storage area, preventing hot spots and ensuring optimal storage conditions.

Both models also include ergonomic designs with user-friendly access points, built with durability in mind to withstand the rigors of daily use. Easy maintenance features such as removable door seals and accessible interior components make routine cleaning simple. Overall, the Sanyo KHS2472 and KHS1872 exemplify quality engineering, catering to a diverse range of refrigeration requirements without sacrificing efficiency or performance.