Sanyo KS2462R Using the Remote Control Unit, ACL button, Air conditioner Indoor unit, Receiver

Models: KS2462R

1 24
Download 24 pages 63.66 Kb
Page 10
Image 10
Using the Remote Control Unit

Using the Remote Control Unit

How to Install Batteries

1. Slide the cover in the direction indicated by the arrow and remove it.

2. Install two AAA alkaline batteries. Make sure the batteries point in the direction marked in the battery compartment.

3. Use a thin object such as the tip of a pen to press the ACL button.

NOTE

·

·

·

·

ACL button

The batteries last about six months, depending on how much you use

the remote control unit. Replace the batteries when the remote control unit's display fails to indicate, or when the remote control cannot be

used to change the air conditioner's settings.

Use two fresh leak-proof type-AAA alkaline batteries.

In replacing batteries, follow the instructions as mentioned in the sub-section ``How to Install Batteries''.

If you do not use the remote control unit more than 1 month, take out the batteries.

How to Use the Remote Control Unit

When using the remote control unit, always point the unit's transmitter head directly at the air conditioner's receiver.

Air conditioner (Indoor unit)

 

Receiver

Remote control

(Transmitter head)

 

unit

 

Remote Control Unit Installation Position

DO NOT

The remote control unit may be operated either from a non-fixed position or from a wall-mounted position. To ensure that the air conditioner operates correctly, DO NOT install the remote control unit in the following places:

·In direct sunlight

·Behind a curtain or other places where it is covered

·More than 26 feet (8 m) away from the air conditioner

·In the path of the air conditioner's airstream

·Where it may become extremely hot or cold

·Where it may be subject to electrical or magnetic noise

·Where there is an obstacle between the remote control unit and air conditioner (since a check signal is sent from the remote control unit every 5 minutes)

10

OI-508-10EG

Page 10
Image 10
Sanyo KS2462R Using the Remote Control Unit, ACL button, used to change the air conditioners settings, Receiver, unit