Care and Cleaning (continued)
How to remove the anti-mold filter
1. Grasp both ends of the | Air intake grille | |
air intake grille and | ||
| ||
pull it out and up. |
|
2.Push the
filter up slightly, and then pull it down.
Anti-mold filter
Cleaning Use a vacuum cleaner to remove light dust. If there is sticky dust on the filter, wash the filter in lukewarm, soapy water, rinse it in clean water and dry it.
How to replace the | 1. With the ˝FRONT˝ mark facing |
| you, slide the |
| up into the unit and then |
| lower the handle into the |
| groove on the unit. |
| 2. After installing the |
| filter, press the locations |
| marked by the arrows ( ) |
| and close the air intake grille. |
Air intake grille
Insert into the groove on the unit.
21 |