Operation with the Remote
Control Unit
1. Manual Operation
STEP 2
STEP 3
STEP 1 | STEP 4 |
STEP 5
NOTE
Check that the circuit breaker on the power panel is turned on and that the operation selector of the indoor unit is in the ON position.
Press the setting buttons as described below and change the settings as desired.
| STEP 1 |
| Press the MODE selector button and select the desired | |
|
|
| mode. | → |
|
|
| For drying operation | |
|
|
| For cooling operation | → |
| STEP 2 |
| To start the air conditioner, press the ON/OFF | |
|
|
| operation button. |
|
|
|
|
| |
| STEP 3 |
| Press the temperature setting buttons to change the | |
|
|
| temperature setting to the desired temperature. | |
|
|
| Adjustable temperature range: | |
|
|
|
| 86 °F max. |
|
|
|
| 60 °F min. |
|
|
| The temperature setting changes by two degrees each | |
| NOTE | |||
|
| time the button is pressed. (The air conditioner | ||
|
|
| ||
|
|
| remembers the new temperature setting even when it is | |
|
|
| turned off.) |
|
|
|
|
| |
| STEP 4 |
| Set the FAN SPEED selector button to the setting you want. | |
|
|
| If the fan speed is set to | (Automatic), the fan speed |
| NOTE | |||
|
|
| switches automatically, according to the difference | |
|
| |||
|
|
| between the actual room temperature and the temperature | |
|
|
| setting. |
|
|
|
|
| |
| STEP 5 |
| Press the FLAP button and set the airflow direction as | |
|
|
| desired. |
|
|
|
| (Refer to ˝Adjusting the Airflow Direction˝ on page 19.) | |
|
|
|
|
|
To stop the air conditioner, press the ON/OFF operation button again.
12 |