Sanyo MBR-704GR Routine Maintenance, Cleaning of cabinet, Cleaning of evaporation tray

Models: MBR-704GR MBR-704G

1 24
Download 24 pages 60.24 Kb
Page 19
Image 19
ROUTINE MAINTENANCE

ROUTINE MAINTENANCE

Cleaning of cabinetWARNING

Always disconnect the power supply to the unit prior to any repair or maintenance of the unit in

order to prevent electric shock or injury.

Ensure you do not inhale or consume medication or aerosols from around the unit at the time of maintenance. These may be harmful to your health.

Cleaning of evaporation trayCAUTION

Always wear dry gloves to protect hands at the time of maintenance. Failure to wear gloves may result in injury from edges and corners.

Cleaning of cabinet

1.Clean the unit once a month. Regular cleaning keeps the unit looking new.

2.Use a dry cloth to wipe off small amounts of dirt on the outside and inside of the unit and all accessories. If the unit is very dirty, use a neutral detergent.

3.After cleaning, wipe away the cleaner completely with a cloth washed in clean water.

4.Never pour water onto or into the unit. Doing so can damage the electric insulation and cause failure.

The compressor and other mechanical parts are completely sealed. This unit requires absolutely no lubrication.

Remove dust from the power supply plug periodically. A dusty plug or improper insertion may pose a hazard.

Cleaning of evaporation tray

This unit is provided with the evaporation tray on the back.

1.Pull the lower side of the tray toward you.

2.Lift the tray upwards to remove the tray from the hook.

3.Take out downwardly.

4.Wash the tray and replace.

Evaporation tray

18

Page 19
Image 19
Sanyo MBR-704GR instruction manual Routine Maintenance, Cleaning of cabinet, Cleaning of evaporation tray