CAUTIONS FOR USAGE

1.If the unit is unplugged or the power to the unit is interrupted, do not restart the unit for at least 5 minutes. This protects the compressor.

2.This inner cabinet is refrigerated by the forced circulation of cooled air inside the chamber. Ensure that the intake and exhaust vents are not blocked. Adequate space should be provided between the items inside the unit to allow air circulation.

3.Never store corrosive materials such as acid or alkali where the container is not completely sealed. This could possibly lead to corrosion of the evaporator resulting in refrigerant leakage and subsequent loss of cooling ability.

4.Once the chamber temperature has stabilized, put the items into the chamber in small batches to minimize the temperature increase.

5.In the case where condensation forms on the front of the glass due to high ambient humidity, wipe it off with a soft and dry cloth.

6.Do not use brushes, acids, benzene, thinners, powdered soap, polishing powders, or hot water for cleaning, as they can cause the painted surfaces and parts made of plastic and rubber to deteriorate. Be especially careful not to wipe plastic or rubber parts with volatile solvents such as benzene. Rinse off neutral detergents completely with cloth washed in clean water.

7.Fix the shelves securely. Place items on the shelves and leave a space between the walls of the cabinet and the contents to allow air circulation. Do not place items on the floor of the chamber.

8.Always close the door firmly. The door check lamp is lit when the door is open. The alarm buzzer sounds two minutes after door opening. The buzzer can be cancelled automatically when the door is closed.

9.Always open and close the door gently. Rough handling of the unit may lead to stocked items tipping over, incomplete closing of the door, or damage to the door gasket.

10.Do not put any articles on the unit. Blocking of the top will decrease the heat discharge which can cause poor cooling and failure of the unit.

11.Do not stock articles beyond the load line. Containers outside the load line disturb the air circulation in the chamber and cause poor cooling. See page 14.

ENVIRONMENTAL CONDITIONS

This equipment is designed to be safe at least under the following conditions (based on the IEC 1010-1):

1.Indoor use;

2.Altitude up to 2000 m;

3.Ambient temperature 5oC to 40oC

4.Maximum relative humidity 80% for temperature up to 31oC decreasing linearly to 50% relative humidity at 40oC;

5.Mains supply voltage fluctuations not to exceed ±10% of the nominal voltage;

6.Other supply voltage fluctuations as stated by the manufacturer.

7.Transient overvoltages according to Installation Categories (Overvoltage Categories) II; For mains supply the minimum and normal category is II;

8.Pollution degree 2 in accordance with IEC 664.

6

Page 6 Page 8
Page 7
Image 7
Sanyo MBR-704GR instruction manual Environmental Conditions
Page 6 Page 8

MBR-704GR, MBR-704G specifications

The Sanyo MBR-704GR and MBR-704G are standout models in the realm of solar refrigerator technology, designed to provide reliable refrigeration solutions in off-grid environments. These units are particularly popular among outdoor enthusiasts, campers, and people living in remote areas due to their efficient energy consumption and robust performance.

One of the main features of the Sanyo MBR-704GR and MBR-704G is their impressive energy efficiency. Both models are designed to run on solar power, making them an eco-friendly choice for users who want to reduce their carbon footprint. With the ability to connect to solar panels, these refrigerators can be powered by renewable energy, allowing for sustained operation even in areas without access to traditional power sources.

The interior of these refrigerators is thoughtfully designed to maximize storage capacity. With adjustable shelves, users can easily accommodate various sizes of food and drinks. The MBR-704GR version even includes a separate compartment for freezing, maintaining a temperature suitable for long-term food preservation. This versatility makes them ideal for a range of applications, from camping trips to emergency preparedness.

In terms of durability, both models feature robust construction. The exterior casing is designed to withstand the rigors of outdoor use, ensuring that the units can handle bumps and jolts during transport. Additionally, the technology used in these refrigerators is engineered to minimize noise, making them suitable for quiet environments.

Temperature control is another highlight, as both the MBR-704GR and MBR-704G are equipped with an advanced thermostat system. This allows users to set and maintain the desired temperature with precision, ensuring that food and drinks stay at optimal freshness. The powerful compressor technology also plays a critical role in maintaining consistent temperatures while minimizing energy consumption.

Finally, the sleek design of these models not only makes them visually appealing but also ergonomically efficient. The easy-access doors and user-friendly controls enhance the overall experience, allowing for simple operation whether at home or in the great outdoors.

In conclusion, the Sanyo MBR-704GR and MBR-704G are perfect examples of modern solar-powered refrigeration technology. With their energy efficiency, spacious interior, durable construction, precise temperature control, and user-friendly design, they stand out as reliable solutions for those seeking sustainable refrigeration options. Whether used in remote areas or as part of an eco-conscious lifestyle, these refrigerators meet the needs of today's environmentally aware consumers.
Top Page Image Contents