Removing the USB memory device
Do one of the followings:
-Press the STOP n button (or the n button on the remote controller).
-To change to other functions.
-Turn off the power.
Note:
Do not disconnect the USB memory device dur- ing playback. If do, the data may be damaged.
SD CARD OPERATION
IMPORTANT INFORMATIONS
-Copyright protection files cannot be played back.
-Copyright protection files on a SD card are skipped automatically when played back.
Before use
-Load an SD card (not supplied) with the music files (MP3 or WMA). (See Fig. 9)
-This unit doesnʼt support the SD card or MMC card which capacity is over 2G.
-Down load the music files (MP3 or WMA or WAV) into the SD card (not supplied) from your PC.
-This unit can recognize up to 511 files or 255
folders in SD card. Note:
Some cards cannot be used depending on its structure.
Basic playback
1.In the USB mode press the USB/SD button again to select “SD” function. The total number of folders on the SD card appear on the display.
FOLDER
SD
Note:
-If the connection of the SD card is failed or the unit cannot recognize the SD card. “no” appears.
-If thereʼs no file in the SD card, or just some empty folders in the SD card, “no” appears.
2.Press the PLAY/PAUSE i button to start playback.
3.Press the MEMORY/FOLDER button, “FOLDER” blinks on the display, then press the f/FILE- or FILE+/e button to select the desired folder.
4.When the first file number of selected folder appears press the f/FILE- or FILE+/e button to select a desired file and playback start automatically.
MP3
SD
5.Press the STOP n button to end SD card playback.
Temporarily stopping playback
Press the PLAY/PAUSE i button, “k” ap- pears on the display. To resume play, press the button again.
Programmed playback
Refer to the same description on page 13.
Removing the SD card
1.Press the STOP nbutton, then switch to other function.
2.Press the card slightly into the slot to release.
3.Pull it out. (See Fig. 9)
15
685XEEn.indd 15
2008.7.23 8:39:21 AM 
