Sanyo MCD-UB685M MP3 CD Play, Programmed Play, To add a new file to a programme, To change a file

MP3 CD Play

1.Load the MP3 CD. (See page 10)

The total number of folders of the MP3 CD appears on the display.

FOLDER

2.Press the PLAY/PAUSE i button to start playback.

3.Press the MEMORY/FOLDER button, “FOLDER” blinks on the display, then press the f/FILE- or FILE+/e button to select the desired folder.

4.When the first file number of selected folder appears press the f/FILE- or FILE+/e button to select a desired file and playback start automatically.

MP3

5.Press the STOP n button at any time to stop the playback.

Note:

-If there is no music data, “no” appears.

-Only select the folder in playing mode.

PROGRAMMED PLAY

Up to 20 files on a disc can be programmed for play in any order.

-To begin the programming procedure, set function switch to “CD/USB/SD” first.

-The same file can be programmed more than once.

-Load a disc that you want to programme before starting programmed play.

1.Press the STOP n button if necessary.

2.PresstheMEMORY/FOLDERbutton,the“P01” and “MEMORY” appear briefly then “” appears and “MEMORY” blinks.

MEMORY

3.Selectafilebyusingthef/FILE-orFILE+/e button.

MEMORY

4.Press the MEMORY/FOLDER button, the “P02” and “MEMORY” appear briefly then “” appears and “MEMORY” blinks.

5.Repeat steps 3-4 to programme additional tracks.

6.Press the PLAY/PAUSE i button to start playback. “MEMORY” remains lit.

MEMORY

MP3

7.Press the STOP nbutton to stop programme playback at any time.

To cancel programmed play, press the STOP n button twice during play.

Checking the programme

In stop mode when MEMORY remains lit press the MEMORY/FOLDER button repeatedly, the programmed details sequentially appear on the display.

Changing a programme

To add a new file to a programme:

1.In the stop mode, press the MEMORY/FOLD- ER button repeatedly until last programme number is displayed.

2.Select a file as explained above.

3.Press the MEMORY/FOLDER button.

To change a file:

1.In the stop mode, press the MEMORY/FOLD- ER button repeatedly until the file number to be replaced is displayed.

2.Select a file as explained above.

3.Press the MEMORY/FOLDER button.

Note:

Programmed details cannot be partially deleted or inserted.

13

685XEEn.indd 13

2008.7.23 8:39:19 AM