PREPARATION

INSTALLATION OF OPTIONAL SPEAKERS AND STAND

Please read the each option's instruction manual (or installation manual) for the installation.

CAUTION IN INSTALLATION

● Through installation work, handling with more than two people is recommended.

●When holding (moving or lifting) the Plasma Monitor, hold the Monitor's body. Do not handle it by holding the attached accessory parts (the Speakers), otherwise damage could be result.

●Provide space that enough larger than the screen size. The surface must be flat and

maintained with soft material (cloth or blanket) for protecting the screen surface.

●Before placing the Plasma Monitor Screen facing down, make sure there is no object under the screen. Leaving any object may cause damage on the screen surface.

SPEAKERS (OPTIONAL)

Place the Speakers to each side of the Plasma Monitor

and attach Right and Left brackets with the specified

screws. Mount each screw on proper screw hole position

and fix it securely.

Connect the red wire to the red terminal on both of the

Left Speaker

Plasma Monitor and the speakers and connect the black

wire to the black terminal to make correct polarity.

Right Speaker

Speaker Terminal

Red:(+), Black:(-)

 

TABLE TOP STAND (OPTIONAL)

Assemble Table top stand according to the installation manual of the stand.

Mount the stand on the back of the Plasma Monitor by fixing the Arms with screws (3 pcs. for each arm).

Arm

Table top stand

10