Sanyo PDP-31H1ENV, PDP-32H1AN, PDP-32H1EN BASIC OPERATION, TURNING ON / OFF PLASMA MONITOR

BASIC OPERATION

	TURNING ON / OFF PLASMA MONITOR
1	Complete the peripheral connections (with Computer, VCR, etc.)
	before turning on Plasma Monitor. (Refer to "CONNECTING
	PLASMA MONITOR" on Pages 13~15 for connecting that
	equipment.)
2	Connect the Plasma Monitor's AC Power Cord into an AC outlet .
		VOLUME
3	Press MAIN ON/OFF switch on Front Control of Plasma Monitor
	to turn ON. POWER indicator will light up(green) when Plasma
	Monitor is ON. Press MAIN ON/OFF switch again to turn OFF.
						MAIN ON/OFF
	NOTE: When you are operating POWER ON-OFF button on					switch
	Remote Control Unit, turn the Plasma Monitor ON with
				POWER indicator
	MAIN ON/OFF switch on the Plasma Monitor first. This is
	the master switch of the Plasma Monitor. Remote Control			green:ON
	Unit does not work if this switch is OFF. POWER			red :OFF(standby mode)
	indicator lights in red when Plasma Monitor power is
	OFF(standby mode) with Remote Control Unit.
4	When MAIN ON/OFF switch on the Plasma Monitor is ON, you
	can turn power ON/OFF by POWER ON-OFF button on Remote
	Control Unit. When Plasma Monitor power is turned OFF with
	Remote Control Unit, POWER indicator lights in red (standby		INPUT				POWER
	mode) .		VIDEO	COMPONENT ON-OFF
			PC/RGB		VOLUME		ON-OFF

button

NOTE :

When “Power Save” function is set to “Yes” , Plasma Monitor detects signal interruption and turns off Plasma Monitor automatically. Refer to “Power Save” on page 30.

On-Screen display and On-Screen menu disappear after a short while for prevention of afterimage (ghost) on screen.

20