COMPUTER MODE

PC ADJUSTMENTPC MODE ADJUSTMENT

"PC mode adjustment" menu is provided to adjust "Auto setup", "Clock", "Phase", "Position", "Power save" and "Information" to conform to your computer. These function can be operated as follows.

1

Press MENU button and ON-SCREEN MENU will appear.

2

Press

button to select "PC mode adjustment" menu and

 

then press OK button. "PC mode adjustment" menu will appear.

3

Press

button to select the item that you want to adjust, and

 

then press OK button. The selected item will appear.

4

Adjust each level by pressing

button.

Auto setup

"Auto setup" function is provided to automatically adjust "Clock", "Phase" and "Position" to conform to your computer.

"Auto setup" started by pressing the button, and the message "Now adjusting" will be displayed.

Display returns to previous menu when adjustment is completed.

NOTE :

In the following cases, the Plasma Monitor may not adjust itself

with the "Auto setup" function.

1)If the picture is not displayed fully on the screen.

2)When a contrast pictures, such as an outdoor scene, is displayed on the screen.

It depends on signal and computer's configuration, "Auto setup" function cannot be operated properly. In this case, adjust "Clock", "Phase" and "Position" manually.

Clock

Adjust when Vertical noise lines are observed. (Horizontal width will be changed by adjustment.)

Adjust with buttons.

Phase

Adjust when Horizontal noise lines are observed.

Adjust with buttons.

NOTE : This adjustment may be needed when a image becomes unclear or flickering.

Position

Adjusts the screen position.

Adjust with

buttons.

"PC mode adjustment" MENU

PC mode adjustment

Auto setup

Clock

Phase

Position

Power save

Information

:

Select

OK :

OK

MENU

: Return

STATUS

: Exit

PC mode adjustment

Auto setup

Proceed

: Proceed

 

MENU : Return

STATUS : Exit

PC mode adjustment

Clock

 

 

0

 

 

 

 

 

: Adjust

 

 

 

MENU

: Return

STATUS

:

Exit

 

 

 

 

PC mode adjustment

 

 

 

Phase

 

 

0

 

 

: Adjust

 

 

 

MENU

: Return

STATUS

:

Exit

PC mode adjustment

Position

MENU : Return

STATUS : Exit

29