COMPUTER MODE

SELECTING INPUT SOURCE

REMOTE CONTROL OPERATION

Select "PC" or "RGB 1" by pressing PC/RGB button on Remote Control Unit.

FRONT CONTROL OPERATION

Select "PC" or "RGB 1" by pressing INPUT button on Front Control.

NOTE :

"RGB 2" is used for RGB Video signals from 21-PIN connector. (Refer to "CONNECTING TO VIDEO EQUIPMENT" on page 13.)

PC

RGB 1

RGB 2

SELECTING COMPUTER SYSTEM

This Plasma Monitor automatically tunes to most different types of computers based on VGA, SVGA or XGA (refer to “COMPATIBLE COMPUTER SPECIFICATIONS” on page 31). When selecting Computer, this Plasma Monitor automatically tunes to incoming signal and display proper image without any special setting. (Some computers need setting manually.)

If the Monitor cannot be tuned, follow in message will be displayed.

Out of scan range

No signal

When Plasma Monitor cannot recognize connected signal that PC system provides in the message “Out of scan range” is displayed on screen.

There is no signal input from computer. Make sure the connection of computer and Plasma Monitor is set correctly.

28