BASIC OPERATION

WHEN USE MULTIPLE MONITORS

When you use multiple Plasma Monitors, you can use POWER ON button and POWER OFF button on Remote Control Unit instead of the POWER ON-OFF button.

Press POWER ON button to turn Plasma Monitor ON so as not to affect another Plasma Monitor which may be already turned ON.

Press POWER OFF button to turn Plasma Monitor OFF (standby mode) so as not to affect another Plasma Monitor which may be already turned OFF (standby mode) .

 

OK

 

STATUS

MOVE DOWN MENU

 

 

POWER

POWER

 

ON

ON

F

 

button

 

 

OFF

POWER OFF button

OFF TIMER

The OFF TIMER can be set to turn the power off after 30, 60, 90 or 120 minutes.

Pressing the OFF TIMER button on the Remote Control Unit until desired time is displayed.

Off timer

INPUT

VIDEO COMPONENT ON-OFF

PC/RGBVOLUME

OFF

TIMER

button

WIDE

OFF TIMER

When remaining time reaches zero, "Off timer 0" appears for 10 seconds, then Plasma Monitor turns to OFF (standby mode).

PICTURE MOVE UP MUTE

TO CHECK THE REMAINING TIME:

To check the remaining time of OFF TIMER set, press OFF TIMER button once. The remaining time displayed for few seconds.

When you select input signal, the remaining time is displayed below the input mode.

TO CANCEL THE OFF TIMER:

Pressing the OFF TIMER button until the time "0" is displayed.

Off timer

AV 1

58

58

Off timer 0

21