Connect the Plasma Monitor's AC Power Cord into an AC outlet .

BASIC OPERATION

TURNING ON / OFF PLASMA MONITOR

1

Complete the peripheral connections (with Computer, VCR, etc.)

 

before turning on the Plasma Monitor. (Refer to "CONNECTING

PLASMA MONITOR" on P13~15 for connections.)

2

3 Press the MAIN ON/OFF switch on the Front Control of the Plasma Monitor. The POWER indicator will light green when the Plasma Monitor is On. Press the MAIN ON/OFF switch again to turn it off.

4 When the MAIN ON/OFF switch on the Plasma Monitor is ON, you can turn it on by the POWER ON-OFF button on the Remote Control Unit. When the Plasma Monitor is turned off with the Remote Control Unit, the POWER indicator lights red (in standby mode) .

POWER ON/OFF BUTTONS

4

MAIN ON/OFF switch

POWER indicator green:ON

red :OFF(standby mode)

INPUT

 

VIDEO COMPONENTON-OFF

POWER ON-OFF

PC/DVI-D

VOLUME

button

 

WIDE

OFF TIMER

 

The POWER ON and POWER OFF buttons on the Remote Control Unit are master power buttons for the Plasma Monitor.

Press the Power ON button to turn the Plasma Monitor on and the

OK

STATUS MOVE DOWN MENU

SURROUND POWER

POWER ON

Power OFF button to turn the Plasma Monitor off in any case of the following conditions:

ON

AUTO PC

button

●The Main ON/OFF switch is ON and so does the power.

●The Main ON/OFF switch is ON but in standby mode.

●The Main ON/OFF switch is OFF.

OFF

POWER OFF button

NOTE :

When the“Power Save” function is set to “On”, the Plasma Monitor detects signal interruption and shuts itself off automatically. Refer to “Power Save” on page 31.

The On-Screen display and the On-Screen menu disappear after a short while for prevention of afterimage (ghost) on screen.

18