PREPARATION
INSTALLATION OF OPTIONAL SPEAKERS AND STAND
Speakers and stands to upgrade your Plasma Monitor are provided separately. Please read the each option's instruction manual (or installation manual) for more detail on the installation.
Speakers (Optional)
Left Speaker
Small Screws
(2pcs)
Small Screws
(2pcs)
Soft Cloth
Right Speaker
Place the Speakers to each side of the Plasma Monitor and attach Right and Left brackets with the specified screws. Mount each screw on proper screw hole position and fix it securely.
Connect the red wire to the red terminal on both of the Plasma Monitor and the speakers and connect the black wire to the black terminal to make correct polarity.
Table Top Stand (Optional)
Speaker | Screws (3pcs) | Assemble Table top stand according to the |
| ||
|
| |
Screws (3pcs) |
| installation manual of the stand. |
Speaker |
| Mount the stand on the back of the Plasma Monitor |
| by fixing the Arms with screws (3 pcs. for each | |
|
| |
|
| arm). |
Table Top Stand
CAUTION IN INSTALLATION
●Through installation work, handling with more than two people is recommended.
●When holding (moving or lifting) the Plasma Monitor, hold the Monitor's body. Do not handle it by holding the attached accessory parts (the Speakers), otherwise damage could be result.
●Leave the sufficient space for the installation work. The surface must be flat and maintained with soft material (cloth or blanket) for protecting the screen surface.
●Before placing the Plasma Monitor Screen facing down, make sure there is no object under the screen. Leaving any object may cause damage on the screen surface.
9