PREPARATION
NAME OF EACH PART OF PLASMA MONITOR
Back
q
w
i
u | e |
✽
y | t | r |
q Cooling Fan | INSTALL PLASMA MONITOR IN PROPER DIRECTION |
wTerminals and Connectors (Left Side) (Refer to P10)
eSpeaker Output Terminals (Left Side)
(Refer to the Optional Speakers's Installation manual.)
rTerminals and Connectors (Bottom Left) (Refer to P12)
tTerminals and Connectors (Bottom Center) (Refer to P12)
yPower Cord Connector
uSpeaker Output Terminals (Right Side)
(Refer to the Optional Speakers's Installation manual.)
iRS232C Terminal and Optional Net Organizer & switch (Right Side) (Refer to P11)
✽Terminals for Service
These terminals cannot be used in this equipment.
NOTE:
This Plasma Monitor detects internal temperature and automatically controls operating power of Cooling Fans.
Front Controls should be located lower.
HorizontalVertical
This Plasma Monitor can be installed in two ways, normal (horizontal) and vertical.
CAUTION:
DO NOT INSTALL UNSPECIFIED DIRECTION, OR COOLING AIR CIRCULATION IS PREVENTED AND IT MAY RESULT IN FIRE HAZARD.
7