COMPUTER MODE

SELECTING INPUT SOURCE

REMOTE CONTROL OPERATION

Select "PC" or "DVI-D" by pressing the PC/DVI-D button on the

 

 

PC

Remote Control Unit.

 

 

 

 

 

 

 

 

 

 

 

 

DVI (PC)

 

 

 

FRONT CONTROL OPERATION

Select "PC" or "DVI-D" by pressing the INPUT button on the Front

Control of the Plasma Monitor. (Refer to P21)

SELECTING COMPUTER SYSTEM

This Plasma Monitor automatically tunes to most different types of computers based on VGA, SVGA or XGA (refer to “COMPATIBLE COMPUTER SPECIFICATIONS” on page 32). When selecting PC for the input mode, this Plasma Monitor automatically detects the incoming signal and displays a proper image without any special setting. (Some computers need manual setting.) If the Monitor may not be able to display a proper image, the following messages will be displayed.

Out of scan range

No signal

When the Plasma Monitor detects any signal out of the system formats provided in the Compatible Computer Specifications on page 32 of this manual, the message “Out of scan range” will be displayed for a few seconds.

There is no signal input from the computer. Make sure the connection of the computer and the Plasma Monitor.

29